Grease Maker
The SL-OA01 Grease Maker performs preliminary processing of cone penetration test samples by manual pressure shearing under specified test conditions in accordance with GB/T 269-2023 standards.
Machine Introduction
This grease tester performs the preliminary processing of cone penetration test samples through manual pressure shearing under specified test conditions, meeting the requirements of GB/T 269-2023 "Determination of Cone Penetration of Grease and Petroleum Grease" test standard.
Technical Parameters
- Thermometer: Bimetallic thermometer with range of 0-50°C and resolution of 0.5°C
- Working stroke: 67-71mm
- Orifice plate hole diameter: Ф6.35+0.13
Primary Applications
- Cone penetration sample preparation - Preliminary processing of grease samples before cone penetration testing
- Manual pressure shearing - Preparing grease samples through controlled mechanical working
- Laboratory sample conditioning - Ensuring consistent sample preparation for penetration testing
- Quality control sample preparation - Standardizing sample preparation procedures in QC laboratories
Frequently Asked Questions
What is this equipment used for?
This instrument performs preliminary processing of cone penetration test samples by manual pressure shearing under specified test conditions, preparing grease samples before they undergo cone penetration testing.
What standards does it comply with?
The instrument is designed in accordance with GB/T 269-2023 "Determination of Cone Penetration of Grease and Petroleum Grease."
What type of thermometer does it use?
The instrument uses a bimetallic thermometer with a range of 0-50°C and a resolution of 0.5°C.
What is the working stroke?
The working stroke is 67-71mm.
What is the orifice plate specification?
The diameter of each hole on the orifice plate is Ф6.35+0.13.
How is the sample processed?
The sample is processed by manual pressure shearing, which prepares the grease for subsequent cone penetration measurement.
